Electrical training courses and schools
Electrical Engineering programs, certificates, diplomas and degrees

Total 90 training course(s)/program(s) at schools in India.



Institute of Piping Engineering & Building Services

Training Centre/Campus: Hyderabad, Andhra Pradesh, India
Phone No.: +91-09885946711

Building Electrical Systems Design & Drafting per NEC

Course Format: On-Site / In-House / Private Tutoring  V

The Program is designed to provide knowledge and expertise in the Design, Analysis, Installation, Maintenance & Testing of Building Electrical Systems per NEC & NFPA Guidelines .

It focuses on Design, Drafting & Installation of Electrical Power Supply & Distribution, Commercial Interior Lighting, Modern Closed Circuit Television System Design, Security System Design, Fire Alarm System Design, Conduit System Design, Low Current Systems, Sound Systems, Overview of Codes & Standards & Safety.


Indian Institute For Production Management

Training Centre/Campus: Rourkela, Odisha, India
Phone No.: +91-6624-280322

MAINTENANCE OF ELECTRICAL EQUIPMENT (Transformer, Switchgear & Motor)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

At the end of the programme, the participants will be able to -


Specify operational procedures for transformers and switchgear

Write down maintenance procedures for transformers as well as LT/HT switchgear

Adopt right methods for protecting transformers

Install, Test and Commission HT & LT Motors

Apply condition monitoring techniques on the above equipment


--------------------------------------------------------------------------------




coverage

Types of Transformers

Condition Monitoring Techniques and Case Studies

Operation of Transformers

Types of Electrical Motors

Maintenance Procedures for Transformers

Selection Criteria

Transformer Protection

Installation, Commissioning and Testing

Types of LT/HT Switchgear

Maintenance Practices for Motors

Operational Mechanisms of Switchgear

Maintenan... [Read More]

INFRA-RED TECHNOLOGY FOR ELECTRICAL INSTALLATIONS

Course Format: Public Course / Instructor-Led / Open Enrollment  V

At the end of the programme, the participants will be able to -


To be able to select the right plant application for Infra-Red Thermal Imaging

To detect electrical faults through IR Thermography

To apply IR Thermography for Energy Conservation





coverage

Introduction to IR Thermography

The Quantum Physics of IR Thermography

Handling of the IR system with demonstration

IR Thermography for detecting Electrical faults

IR Thermography for improving Plant Reliability & Performance

IR Thermography for Energy Conservation




ELECTRICAL MAINTENANCE FOR MECHANICAL ENGINEERS

Course Format: Public Course / Instructor-Led / Open Enrollment  V

At the end of the programme, the participants will be able to -


It aims about imparting necessary knowledge in Electrical

Maintenance to ensure trouble free operation of different types of Electrical Equipment





coverage

Basics of Electrical Engg. applicable to Industries

Maintenance of Industrial Electrical Installation & Equipments

Control Circuits

How to read control circuit and troubleshooting

Confidence building in handling Electrical problems

Electricity Rules & Safety


DOEACC CENTRE, Aurangabad

Training Centre/Campus: Aurangabad, Maharashtra, India
Phone No.: (+91-240) 2400120, 2400121

Electrical & Electronics Instrumentation

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Concepts of : Electrical voltage, Current, Frequency, Power, Power factor and Energy, R.M.S. Average and Peak Values of A.C.
Transducers and Sensors and Their Signal conditioning
Principle of analog volt meter and ammeter
Analog to Digital and Digital to Analog Conversion principle.
Instrumentation amplifier and signal conditioning circuits


CAD STUDIO

Training Centres/Campuses: Faridabad, Lucknow, Jaipur, Mohali, New Delhi, Pitampura, , India
Phone No.: +91-11-41653142

AutoCAD Electrical

Course Format: Public Course / Instructor-Led / Open Enrollment  V

This courses is designed for the new users of AutoCAD Electrical. It focuses on how to build intelligent ladder diagrams and panel layouts. Also cover utilities designed to enable users to build and manage electrical-controls drawings.

COURSES CONTENTS
AutoCAD Electrical Design Concepts
AutoCAD Electrical Environment
Part Catalogue and Footprint Lookup Database
User Interface
Projects and Project Settings
Project Manager
Project Manager
Schematic Drafting
Wires and ladders
3-phase circuits
Editing Tools
Schematic Reports
Automatic Report Generation
Schematic Symbols
Part Catalog Layers and Inquiry
Parts Catalog Database
Programmable Logic Controllers
PLC I/O Address-based Tagging
Spreadsheet to PLC I/O Utility
Panel Layouts
Smart Panel Layouts from Schematics
Panel Footprints
Panel Layout Annotation and Reports


Objective :
To understand t... [Read More]


Invertis University

Training Centre/Campus: Bareilly, Uttar Pradesh, India
Phone No.: 0581 - 2460442, 2460443, 3004100

Electrical & Electronics Engineering

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Four Year Full Time Degree Programme

Electrical and Electronics Engineering in one of the core branches of engineering studies emerged from Electrical Engineering. Most of the branches like Electronics and Communication Engineering, Computer Science and Engineering, Applied Electronics, Electronics and instrumentation, Information Technology have emerged as specialization from Electrical Engineering. However, with wide application of Electronics in controlling and protecting the Electrical equipments and systems, the course has been renamed as Electrical and Electronics Engineering. The major thrust in this course is related to the basic principles and detailed analysis of different types of equipments and systems for generation, transmission, distribution and utilization of Electrical Energy. The programme also covers the study of electronic devices and circuits involved in measurement, instrumentation, control and protection of electrical equipments and conversion s... [Read More]

Electrical Engineering

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Four Year Full Time Degree Programme Electrical Engineering has been playing a vital role in producing technologists of highest caliber. The major thrust of the programme cater to the ever challenging needs of technical excellence in all areas of electrical engineering such as Control and Automation, Power Electronics, Power System, Electrical Drive, VLSI Design, and Integrated Electronics and Circuits.



Eligibility

50% (45% for SC/ST) Marks in 10+2 with Mathematics and Physics along with Chemistry/Computer Science


International Council For Management Studies

Training Centre/Campus: Chennai, Tamil Nadu, India
Phone No.: 091-044-24956036

ELECTRICAL & ELECTRONICS (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Semester I

Paper I- Elements of Management

Paper II - Basics of Computer

Paper III - Technical Drawings

Paper IV - Electrical Technology

Semester II

Paper V - Electrical and Electronics Engineering

Paper VI -Electonics Devices and Circuits

Paper VII - Circuit Theory

Paper VIII - Microprocessor and its Applications

ELECTRICAL ENGINEEING (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

Semester I

Paper I- Elements of Management

Paper II - Basics of Computer

Paper III - Technical Drawings

Paper IV - Electrical Technology

Semester II

Paper V - Electrical and Electronics Engineering

Paper VI -Distribution and Utilization

Paper VII - Circuit Theory

Paper VIII - Measurements


IPCS AUTOMATION

Training Centre/Campus: cochin, kerala, india
Phone No.: 09745200945

AUTOMATION PROJECTS FORBTECH/MTECH Workshop (Certificate)

Course Format: Public Course / Instructor-Led / Open Enrollment

IPCS AUTOMATION IS PROVIDING FINAL YEAR STUDENTS OF BTECH /MTECH TO DO THEIR ACADEMIC PROJECTS IN PLC,SCADA,VFD SYSTEMS. ALL THE PROJECTS ARE MINIATURE VERSIONS OF OUR INDUSTRIAL PROJECTS. STUDENTS WILL GET REAL TIME EXPERIENCE OF PROJECT DEVELOPMENT.


INSTITUTE OF BUILDING SERVICES ENGINEERING

Training Centre/Campus: hyderabad, andhra pradesh, India
Phone No.: 040-31`000224

MEP (Diploma)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

IBSE is an Institute of masters in mep services training. IBSE provide practical experiences which has been extract from well experienced faculties, with site visits for better practical experience. Easy and systematic course material as per the current industrial standards which covers all Detail Engineering, design, Erection, installation and Maintenance Standards of mep courses. The following courses are as follows:
?MEP DESIGN AND INSTALLATION ENGINEERING TRAINING PROGRAM
?HVAC DESIGN AND INSTALLATION ENGINEERING TRAINING PROGRAM
?ELECTRICAL DESIGN AND INSTALLATION ENGINEERING TRAINING PROGRAM
?PLUMBING AND FIER FIGHTINGDESIGN AND INSTALLATION ENGINEERING TRAINING PROGRAM


Jamia Millia Islamia

Training Centre/Campus: New Delhi, Delhi, India
Phone No.: +91(11)26981717

Electrical Engineering

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The Faculty of Engineering & Technology offers a four year Evening Programme leading to the degree of Bachelor of Engineering (B.E.) in Electrical Engineering for the working professionals/ experience holders to upgrade their professional qualification, knowledge and skills in their respective fields. The classes in evening courses are usually held from 6.00 pm to 9.15 pm daily, Monday to Saturday. Practical classes are held during daytime on Sunday. The timings of classes may be changed, if required. Annual examinations of these courses are normally held in the month of December/January.

Electrical Power System (Master Degree)

Course Format: Public Course / Instructor-Led / Open Enrollment  V

The course will have full-time candidates, both fresh graduates and also in-service Engineers duly sponsored by their respective employers. The sponsored candidates (full-time) will complete the course in four semesters along with the regular students. The sponsored candidates can also complete the course in six semesters as a part-time programme, for which their classes will be arranged along with the full-time students.

A sponsored candidate should be a teacher/researcher in a Government, Semi government or Private Educational Institution with two years teaching / research experience after passing the qualifying examination. A sponsored candidate can also be an employee in a Government or Semi-government organization / Public Sector Unit, with not less than two years Industrial or field experience in the relevant area after passing the qualifying examination. Preference will be given to the candidates in the academic profession or with R & D organisations

Pages: 1 2 3 4 5 6 ...

[ Popular Topics ]



- Course Subjects -
Ask for Training
Add Courses